|
Cable Ascender: Cable Grab These Canadian cable ascenders are the TOP PICK! Small sleek, easy to load; locks in with carabiner. No funky pins or chains to tangle with! CABLE GRABS Cable Ascenders are used on vertical belay systems. This is a removable device that automatically travels along a 3/8 in. steel cable permitting a climber to use both hands while ascending or descending a vertical belay cable, climbing pole or cable protected ladders. The cable Ascender grab is made of stainless steel for protection against rust and corrosion. For use in all conditions. In some situations it may require the use of a load limiting device. An Auto-Lock Steel Carabiner is included. A cable grab safety device which releasably attaches a workman's safety belt or harness lanyard to a vertically extending safety steel cable or the like. The device includes a primary frame assembly constructed of an elongated U-shaped bracket having a pair of spaced apart parallel side plates which is adapted to fit around the cable. A secondary frame assembly also comprised of a pair of side plates is adapted to fit within the U-shaped bracket after the cable is inserted. The secondary frame assembly carries a brake mechanism in the form of a pulley mounted in an elongated slot so as to be movable toward or away from the cable and a lever adapted to be attached to a worker's lanyard for moving the pulley so as to engage the cable in the event of a fall. This unit follows along with the climber and locks into place if a fall occurs. ANSI Rated  | 
